********************************************************************
 KONICA MINOLTA HDD TWAIN Driver Ver.3     Version 3.1.2.5

  Copyright (C) 2000-2008 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
********************************************************************

********************************************************************
 Introduction
   This software is scanner driver for reading image data from 
   Box of KONICA MINOLTA device and scanning the data into 
   application software supporting TWAIN.

********************************************************************
  Supported Devices

    - KONICA MINOLTA bizhub 750/600
    - KONICA MINOLTA bizhub 500/420/360
    - KONICA MINOLTA bizhub 200/250/350
    - KONICA MINOLTA bizhub C650
    - KONICA MINOLTA bizhub C550
    - KONICA MINOLTA bizhub C451
    - KONICA MINOLTA bizhub C450
    - KONICA MINOLTA bizhub C351
    - KONICA MINOLTA bizhub C250
    - KONICA MINOLTA bizhub C352
    - KONICA MINOLTA bizhub C300
    - KONICA MINOLTA bizhub C252
    - KONICA MINOLTA bizhub C353
    - KONICA MINOLTA bizhub C253
    - KONICA MINOLTA bizhub C203

********************************************************************
 System requirements

   - Operating System
     - Windows NT4(SP6a)
     - Windows 2000 Professional(SP4)
     - Windows XP Home Edition(SP2)
     - Windows XP Professional(SP2)
     - Windows Vista Home Basic /Home Premium /Ultimate /Business /Enterprise
   - Computer
       According to the environment recommended for the operating system.
   - Memory
       According to the environment recommended for the operating system.
   - Network
       Computer with TCP/IP protocol settings correctly specified.
   - Hard disk
       20 MB or more of available space.

********************************************************************
 Attentions and restrictions when using Scanner driver

  - When driver screen is displayed, exit the driver before 
    exiting the application.

  - The driver dialog, error message, etc. may appear behind 
    the application and then you cannot make the operation.  
    When this occurs, select the driver screen by using the task bar, 
    or press Alt and TAB key to move the driver screen to the 
    front and then operate.

  - There is a case which fails when updating the driver and 
    occurs error message "Error applying transforms. Verify that 
    the specified transform paths are valid". 
    Please install again after uninstalling older version.

********************************************************************
 Cautions and restrictions with specified applications

 <Adobe Acrobat 6.0/7.0>
   - When the documents consisting of different page sizes are scanned, 
     they may not be scanned into application normally.
     In such case, scan them without mixing different page sizes.
   - When an original whose length is 17 inches or more is scanned, 
     it may not be scanned correctly into application.

 <Microsoft Office 2000>
   - When the documents consisting of different page sizes are scanned, 
     they may not be scanned into application normally.  
     In such case, scan them without mixing different page sizes.

   - With Word2000/Excel2000, when the scanning is specified within 
     the large range such as A4, it is not likely to be able to scan. 

 <Microsoft Office 2003 SP1/SP2>
   - Image may not be scanned in correct colors.  
     If this phenomenon occurs, it may be solved by scanning again.

 <Microsoft Office Document Imaging>
   - With OFF set to "Show scanner driver dialog before scanning", 
     you cannot scan.  
     You always need to set ON to this checkbox.